Overview:
The PICO XP jetting system takes the guesswork out of how to achieve the same extremely precise (XP), repeatable non-contact micro-dispensing from valve-to-valve, after maintenance, and as temperatures rise or fall.
Request a quote
Manufacturers sometimes see variation in dispensing performance when there is even a slight change in the tolerance of a jet valve’s internal geometry. Therefore, one jet valve may produce a slightly different dispensing outcome than another with the same dispense settings. This is also why dispensing outcomes can sometimes change after a fluid body is removed, cleaned for maintenance, and then returned to valve.
The PICO XP jetting system’s proprietary self-regulating calibration technology controls for variations in fluid body tolerance to maintain the same micro-dispensing repeatability from valve-to-valve and after maintenance.
Self-Regulating for Superior Repeatability
Micron (µm) level stroke adjustment and unique self-regulating calibration allow this revolutionary jetting system to meet unprecedented levels of fluid dispensing repeatability over long periods of time, regardless of environmental factors.
Maintain Micron Level Stroke
Its one-of-a-kind sustained stroke target seeking allows it to self-adjust to maintain its micron (µm) level stroke setting for long periods regardless of environmental conditions, such as valve temperature changes that can alter dispense results over time.
High-Speed Jetting up to 1000Hz
The system includes a PICO Pµlse XP jetting valve and PICO Toµch XP controller with an intuitive touchscreen interface for simplified set up. It can apply micro-deposits as small as 0.5 nL at speeds up to 1000Hz (deposits per second) continuously.
Increase Production Throughput
The jetting valve’s innovative tool-free latch mechanism allows for easy removal of wetted parts, reducing serviceability to seconds – significantly increasing production throughput.
Meet Changing Demands
Its exchangeable, modular design provides flexibility to meet changing production demands. Select from a wide range of fluid body assemblies engineered to deliver precise, repeatable non-contact micro-dispensing for a variety of exacting application requirements. Available in a range of orifice sizes from 50-600 µm in diameter.
Simplify Cleaning
Controller
| Item | Specification |
| Size | 22.0w×120.0H×75.0L mm (0.87w×4.72H×2.92L") |
| Weight | Pulse non-contact jet valve: With cable: 524.0 g (18.5 oz); Without cable: 362.0 g (12.8 oz) |
| Pulse contact dispense valve: With tip adapter / with cable: 538.0 g (19.0 oz); With tip adapter / without cable: 376.0 g (13.3 oz); Without tip adapter / with cable: 524.0 g (18.5 oz); Without tip adapter / without cable: 362.0 g (12.8 oz) | |
| Maximum fluid pressure | 35.0 bar (500 psi) |
| Fluid inlet | M5 |
| Mounting | M4 x 0.7; Tip adapter kits for HD contact valves: M2.5 x 0.45 |
| Continuous running condition maximums and minimums (see NOTES below) |
|
| Fluid body | 303 stainless steel or PEEK |
| Ball and seat | Ceramic |
| Heater body | Aluminum |
| Tip adapter kits for HD contact valves | 303 stainless steel |
| Maximum fluid body temperature (see NOTES below) | 100∘C (212∘F) (except PEEK); PEEK: 45∘C (113∘F) |
| Valve cable minimum bend radius | 44.45 mm (1.75") |
| Product classification | Installation Category 2; Pollution Degree 2 |
| Approvals | CE, UKCA, WEEE, TÜV |
NOTES:
