Overview:
Featuring a digital display of all fluid dispenser settings and time adjustment as fine as 0.0001 seconds, Ultimus™ I-II dispensers bring exceptional control to medical device, electronics, and other critical dispensing processes.
Request a quote
Ultimus I features 0-100 psi (0-7 bar) constant-bleed air pressure regulation and provides greater control when dispensing any type of fluid.
Ultimus II features 0-15 psi (0-1 bar) constant-bleed air pressure regulation and provides greater control when dispensing low-viscosity or thin fluids.
Easy to Use
Both Ultimus I and II feature constant-bleed air pressure regulation, which makes adjusting the pressure setting more intuitive. Highly accurate regulation of air pressure makes these fluid dispensers reliable and easy to use.
Higher Precision
Digital display of all dispensing parameters allows better process control by allowing you to monitor all settings on the screen. These dispensers also allow users to save up to 16 dispensing programs. Time setting adjustments ≥ 0.0001 provides a higher level of precision.
Dispense from Anywhere
With a universal power supply and multilingual display options, these fluid dispensers promote worldwide use and support. In addition, operator lockout of the time setting helps maintain a consistent dispensing process.
Compatible Fluids
The Ultimus I-II dispenser can be used with nearly any type of assembly fluid. Some materials are so abrasive they would render a dispense valve obsolete within a shift or two. In this case, fluid dispensers are a better option since they dispense from a disposable syringe barrel and dispense tip that are thrown away after each use.
Compatible fluids include, but are not limited to:
| Item | Specification |
| Cabinet size | 14.3W×18.1H×17.3Dcm (5.63W×7.12H×6.82D") |
| Weight | 2.3kg (5.0lb) |
| Power adapter | AC input: 100–240VAC (±10%), ∼50/60Hz, 0.6A DC output: 24VDC@1.04A |
| End-of-cycle feedback circuits | 5–24VDC, 100mA maximum |
| Cycle initiate | Foot pedal, finger switch, or 5–24VDC signal |
| Cycle rate | Exceeds 600 cycles per minute |
|
Time |
Range: 0.0001–999.9999s |
| Accuracy: Within ±0.05% of the selected time setting | |
| Repeatability: Less than 16μsec at any time setting | |
| Input air pressure | 5.5–7.0bar (80–100psi) |
| Air output | Ultimus I: 0–7.0bar (0–100psi) Ultimus II: 0–1.0bar (0–15psi) |
| Pressure readout accuracy | Ultimus I: ±0.1bar (±2.0psi) Ultimus II: ±0.02bar (±0.3psi) |
| Vacuum | 0–1.3inHG (0–18inH2O) |
| Vacuum readout accuracy | ±0.15inHG (±2.0inH2O) |
| NOTE: Vacuum readout accuracy is calibrated from 0–0.44inHG (0–6inH2O). | |
| Ambient operating conditions | Temperature: 5–45∘C (41–113∘F) Humidity: 85% RH at 30∘C non-condensing Height above sea level: 2,000m maximum (6,562ft) |
| Approvals | CE, UKCA, TUV, RoHS, WEEE, China RoHS |
