Overview:
Nordson EFD UltimusPlus™ fluid dispensers provide next level process control for advanced applications of glues, oils, greases, epoxy, silicones, sealants, cyanoacrylates, solder pastes, and other assembly fluids dispensed with syringe barrels manually or on automated systems.
Request a quote
UltimusPlus I
This unit features a 0.7-7.0 bar (10-100 psi) pressure regulator and is ideal for dispensing a wide range of fluids.
UltimusPlus II
This unit features a 0.02-1.0 bar (0.3-15 psi) pressure regulator and provides greater control when dispensing low-viscosity or thin fluids.
Manual Applications
Simplify setup and operation with advanced touchscreen control of dispensing parameters. UltimusPlus is so easy to use it allows users to focus on making accurate, controlled deposits. Plus, full operator lockout of time, pressure, and vacuum settings prevents operator-to-operator variability between shifts.
Automated Applications
Because the dispenser features NX capability, it is remotely accessible. This allows it to be monitored and controlled from a personal computer, Programmable Logic Controller (PLC), and any plant controller that uses Transmission Control Protocol / Internet Protocol (TCP/IP) to communicate via Ethernet.
Compatible Fluids
The UltimusPlus dispenser can be used with nearly any type of assembly fluid. Some materials are so abrasive they would render a dispense valve obsolete within a shift or two. In this case, fluid dispensers are a better option since they dispense from a disposable syringe barrel and dispense tip that are thrown away after each use.
Compatible fluids include, but are not limited to:
Adhesives
Cyanoacrylates
Epoxies
Greases
Oils
Sealants
Silicones
Solder Pastes
| Item | Specification |
| Cabinet size | 21.2W×10.8H×19.2Dcm (8.33W×4.27H×7.55D") |
| Weight | 1.8kg (4.0lb) |
| Power adapter | AC input: 100–240VAC (±10%), ∼50/60Hz, 0.6Amp DC Output: 24VDC@3.75Amp |
| Internal voltage | 24VDC |
| Cycle rate | Exceeds 600 cycles per minute |
| Time range | 0.0001–999.9999s |
| Accuracy | Within ±0.05% of the selected time setting |
| Repeatability | Less than 16μs at any time setting |
| Foot pedal | Voltage: 24VDC, Current: 20mA |
| End-of-cycle feedback circuits | 24VDC, 100mA maximum |
| Cycle initiate | Foot pedal, finger switch, 24VDC signal, or mechanical contact closure |
| Input air pressure | UltimusPlus I: 5.5–7.0bar (80–100psi) UltimusPlus II: 1.7–2.4bar (25–35psi) |
| Air output | UltimusPlus I: 0.7–7.0bar (10–100psi) UltimusPlus II: 0.02–1.0bar (0.3–15psi) |
| Pressure readout accuracy | UltimusPlus I: ±0.14bar (2.0psi) UltimusPlus II: ±0.02bar (0.3psi) |
| Vacuum | 0−1.3inHG (0−18inH2O) |
| Vacuum readout accuracy | ±0.15inHG (±2.0inH2O) |
| Ambient operating conditions | Temperature: 5−45∘C (41−113∘F) Relative humidity (RH): 85% at 30∘C (86∘F), non-condensing Height above sea level: 2,000m maximum (6,562ft) |
| Approvals | CE, UKCA, TUV, RoHS, WEEE, China RoHS |
